Recent content by soopergoober

Well I'm essentially done with version 2 of the XJ and many of the parts I had are no longer needed. Here they are: Two sets of stock dana 30 shafts. Should probably have joints replaced. Unknown U-joint series. $20 ea. Stock front skid, no hardware. $35...

I'm in sort of a bind. I'm past the point of no return on my long arm install -already cut off the lca mounts - and just realized I'm still missing parts. Doh! Anyone have or know where I can find two left hand 7/8 -14 jam nuts locally? Thanks guys!

Honestly don't remember brand. Jks type, might even be jks. Bought it in a hurry when I was putting on my re 3.5 kit and just took whatever 4wheelparts had in stock. Uses a larger axle-end bolt, which will need to be bought, but is otherwise believed to be in good working order and complete...

Will be available once I get my 44 swapped in. It has no known issues, 3.55 gears, and an aussie that's about a year and a half old. Haven't checked shoe thickness recently, but have new shoes that go with it too.

I've got a set of jcr stage two sliders for sale, these are not the long arm version. Missing a couple self-tappers, but otherwise the hardware is complete. $200.

This was all supposed to be done by December, but due to some slow shipping and missing parts I didn't get everything in until last week. Had everything come in when expected I could have handled this myself, but my daughter was just born last week (cute as a button) and between work, school...

Looking for a 1", or at least darn close to 1", drop pitman to match my new trac bar setup. Haven't had any luck at the yards finding a v8 zj pitman (which is supposed to be 1" drop). Please let me know if you have one you'd be willing to part with. Thanks, Nate

Hey guys, I'm in need of a stock zj pitman arm (1" drop over XJ) to match my new trackbar setup. Anyone have one they're willing to part with? Trying to save myself a trip to the junkyard since it's now nice and muddy. Thanks.

I suppose it's time to start one. After two attempts to sell the XJ over my year on unemployment things are starting to turn around and it's time to start the next stage of the build. I sold my little classic toyota today to fund the project. She will be missed, but the family is growing...

I'm planning a major overhaul/rebuild of the rig and I'm going to end up selling my under-the-tube trussed dana 30 so I need a new one to start from scratch on. The cheaper the better. I'll be puttin gears/shafts/full case locker in it so just a housing with knuckles and good...

Hey guys/gals Doing a clutch on my '82 toyota starlet and want to know if anyone knows of a good machine shop to resurface the flywheel at local to placentia/yorba linda? Haven't started yet but wanted to know just in case it's too bell shaped to resurface by hand. Thanks. Nate

Like the title says, this is my 1998 XJ 4-door. This rig started life as a 2wd and was converted to 4x4 about a year and a half ago. Runs Great. 4.0 Automatic. Rubicon express 3.5 super ride kit with extra stock spacer in the front. 32x11.5x15 BFG A/Ts on American Racing 5 spokes. Aussie...

Well, I'm just about done moving and I wanted to say goodbye to all the San Diego area NAXJA peeps. It's been fun and surely we'll still see each other on the trails. Also, I'll take the opportunity to say hello to everyone in Orange County and the surrounding areas. I just moved to...

In the middle of helping someone put a 1998 2wd aw4 into a 1996 2wd and would like to know what exactly I need to do to make the 1998 compatible with the 1996 wiring and tcu. Thank in advance and yes I've searched.

So here's the deal. I just found out that while I'm in technical school I get 50% off on any snap-on product. I'd like to have a complete kit suitable for a profesional auto tech pieced together before the program ends in a year at which point I'll have to put together a kit at or near retail...