Recent content by uncc civilengineer

  1. uncc civilengineer

    Wtb: drop brackets and braces

    Looking for drop brackets and braces. Pm me.
  2. uncc civilengineer

    Transmission Issues... Searched w/ no luck..

    JEEP: 1999 w/ 145k AW4. I tried searching but there are tons/tons of old threads to read though. Jeep is throwing the P0740 code and i'm thinking bad TPS, NSS, or solenoid... I did drain and fill the tranny with DEX III 4 times (just removed drain plug, added fluid... drove awhile.. did...
  3. uncc civilengineer

    1999 XJ Classic (Limited setup) Lift, snorkle, leather, etc.

    My brother is looking to sell his jeep... 1999 XJ Classic w/ 136,xxx miles ~~> The entire interior/trim, etc. from a Limited was swapped over <~~ Automatic Leather, power, heated seats (driver's heater seems to have stopped working as of this past weekend.. very common issue). Overhead...
  4. uncc civilengineer

    FS: Misc XJ Stuff (Updated as Found) 97+ Glass, Spare, etc.

    So, I was helping my dad clean out our storage building and came across some XJ stuff... 1. L and R Rear Tinted Glass for 97+ XJ (the rear quarter glass w/ seals) $50 OBO for the pair... 2. factory donut spare tire (free if you pick it up) I'll update as I go through the other boxes...
  5. uncc civilengineer

    --> FS <-- STAUN Deflators 6-30 psi

    I have (4)... never used 6-30 PSI deflators... $50 shipped Chris
  6. uncc civilengineer

    -->FS<-- (2) Used 15x10 6x5.5 Cragar Soft 8's

    USED: (2) 15x10 6x5.5 w/ 4" Back Spacing.... $50 for the pair.... Chris ... rather not ship...
  7. uncc civilengineer

    -->FS<-- (2) 6x5.5 1.25" wheel spacers

    I have (2)... Could use a quick sand blasting or good cleaning/painting.. $40 for the pair
  8. uncc civilengineer

    -->FS<-- Traction Bar w/ Johnny Joint

    I believe it's 2" 3/4" 16tpi Johnny Joint and traction bar... Very solid, no longer needed... $40
  9. uncc civilengineer

    Traction Bar

    I have a traction bar that's no longer needed w/ my setup.. Jonny Joint at the frame end and (2) poly bushings at the axle end... All you need is a shackle at the frame and a mount on the axle... Bar was built back when Carolina RockShop was in Charlotte... mount you'll need to buy or make...
  10. uncc civilengineer

    (2) 15x10 6x5.5 Cragar Soft 8's

    I have (2) and would like $30/each... in all around good condition. Chris ... rather not ship but will...
  11. uncc civilengineer

    --> Warn 20990 Hub set <--

    Warn 20990 Hub set... gently used as spares, removed, not needed, in the box ready to go. Price: $75 OBO Will ship probably for cheap in a flat rate box < $7 probably anywhere.... Will post pic if needed...
  12. uncc civilengineer

    99 XJ Limited (lifted, snorkle, etc.)

    My brother is looking to sell his jeep... 1999 XJ Limited w/ 126,xxx miles Auto Leather, power, heated seats ARB Snorkle Stock D30 / 29spline 8.25 RE 4.5" Superflex (adjustable control arms, full leaf packs, shackles, etc.) JKS ACOS Old Man Emu LT shocks Sony CD player 5.9 wheels Almost NEW...
  13. uncc civilengineer

    Quick pricing question... wheels/acos/stuff

    I've been away for so long I dont know how to price stuff. I have (5) Silverstars 5.9L and 60th Anniversary wheels that are mounted to 265x75x16 BFG MTs. (4) are driveable but probably have around 20% tread left and the spare is less... I also have a set of ACOS and finally some Teraflex...
  14. uncc civilengineer

    Picked up a 98 Classic

    Just wanted to share.. I picked up a 98 Classic tonight w/ 150K on it... All service records since new and seems to be pretty solid... Going to do some maintenance this week and we'll see what I've actually gotten myself back into... Oh yeah picked to up for $3,000... seems decent to me...
  15. uncc civilengineer

    High Point NC 1999 XJ Limited, D44, locked, KM2's, etc.

    Posting for a guy on looks just like my old one started out as.. Here's the add... 1999 XJ Limited 4.0 Auto - Clear title in hand... 123K miles D44 w/ Disc from a 87 recently rebuilt w/ 3.55's and Lockright... 1" taller perches...