Search results

  1. Brent T

    WJ Knuckles / Brakes on JK44?

    Like the title says. If I were to source a bare JK44 front axle, either secondhand or buy new from one of the aftermarket outfits, will the WJ stuff fit? Knuckles, Hubs, Rotors, etc.?
  2. Brent T


    fZ4nR6NrfXc 692Lav6Jg1A _bC6ZfNjMEo suoAt4zhfwE zEGUgFQS53U MpbL7ny38g8
  3. Brent T


    So, we ran Smasher trail near Cottonwood, AZ. Here are some of the pics my son and I took. He's 14 and I let him drive about half the time. He's been wheeling with me since he was about 7 and he loves it.
  4. Brent T

    Relays and heat ?

    So awhile back I installed a couple of LED light bars. They came with a harness / relay which I used all except for the switches because I wanted to use the Carling style instead of just a toggle. I installed the relays underhood, which I assumed is pretty common. Awhile back I turned the...
  5. Brent T

    Dirtbound DIY rear bumper - little help please

    N/M. Got it.
  6. Brent T

    Detours Tailbone F/S $275

    I'm getting ready to build a Dirtbound Offoad DIY rear bumper / tire carrier so the Tailbone has to go. The Tailbone has been a nice setup, but provides no corner protection since it utilizes the stock bumper skin and plastic end caps. Still installed on my rig, but I will remove soon. Here's a...
  7. Brent T

    Did I screw up by installing Johnny Joints with radius arm setup?

    Here's the scoop. I installed a TNT radius arm setup about a year ago. Did not replace the 15 year old stock UCA bushings at that time. Noticed a couple months ago they were shot so I thought I'd upgrade to Johnny Joints instead. Seemed like a no brainer. I have not wheeled it yet, but ran...
  8. Brent T

    TM on Sunday 2/16?

    Anybody want to get out and wheel something at TM on Sunday morning? Looking at something moderate, LT, UT, Predator or ?? It's been awhile . . .
  9. Brent T

    Truss install

    Would I be nuts to try and MIG weld my front TNT truss on without removing the axle from the vehicle? Seems like it would not be a big deal and would save the work of removing all the steering, brake lines, etc. Just remove the upper radius arms, cut the mounts off, grind everything clean and...
  10. Brent T


    <iframe width="420" height="315" src="//" frameborder="0" allowfullscreen></iframe> <iframe width="420" height="315" src="//" frameborder="0" allowfullscreen></iframe> 9QXAjeczGvw
  11. Brent T

    TM 9/14

    I took very few pictures but did get some vid. Here are a couple from Saturday. Stuff that shoulda been easy gave us some grief. I have more vid but haven't taken time to edit yet. Maybe Kraker, Dave, Andrew, etc. can post up some pics.
  12. Brent T

    RE 3.5 Superflex kit F/S

    I have my old lift kit for sale. All in good condition. Package deal $500. Includes the following: RE 1463 3.5" rear leaf packs RE 1300 3.5" front coils RE 1600 adjustable track bar w/modified stock mount RE 3700 fixed length lower control arms 4 shocks (generic white) 2" front bump stops...
  13. Brent T

    FS: 5 16x8 Moabs w/32" KM2's

    I have 5 16x8 TJ "Moab" wheels with 265/75-16 BFG KM2's off my XJ. About 80% tread left. Some chunking on outside lugs from being in the rocks. All 5 wheels have some rock rash so if you're looking for some perfect wheels for mall crawling, these aren't them. Asking $800 for the set of 5...
  14. Brent T

    I need a stock battery tray for my '98.

    Anybody have one? I'm on the westside. Thanks
  15. Brent T

    Props to TNT Customs

    <!-- / icon and title --><!-- message --> I ordered my TNT long arm kit a few weeks back. Everything arrived within a few days. Last weekend I mocked it up on the floor of my garage and noticed two of the crush sleeves appeared to be the wrong length. Called them on Monday morning to advise /...
  16. Brent T

    Props to TNT Customs

    I ordered my TNT long arm kit a few weeks back. Everything arrived within a few days. Last weekend I mocked it up on the floor of my garage and noticed two of the crush sleeves appeared to be the wrong length. Called them on Monday morning to advise / discuss. They verified that they were...
  17. Brent T

    A few odds and ends for sale

    Hi-Lift mount for 1" to 2" tube. Almost new. $30 Aluminum Hawse Fairlead for synthetic line. Bolted on, never used. $20 Stock Style Front Recovery Points. $40
  18. Brent T

    Hard to Turn Left

    Here's the history. A few weeks ago I had an E-Locker installed. At the same time I had the steering box replaced (stock) because I had stripped out some threads when I installed my new front bumper a couple days before. When I first drove it after getting the locker and steering box...
  19. Brent T

    Hi-Lift mounted under rear seat (how to)

    Well, I finally got tired of having my hi-lift mounted to my hybrid cage. It was easy to get to up there, but I was always worried it would get stolen sooner or later. Also it kinda reminded me of some ricer with the big spoiler mounted on the back of his Honda. I decided to see if I could make...
  20. Brent T

    How do I get more NAXJA stickers?

    I got one when I paid my membership. It's on my toolbox in the garage. I'd like to put one on the XJ. I'll pay for them, just haven't seen any way to order a few.