Search results

  1. rocknxj

    2016 Easter Jeep Safari (Moab)

    Anybody planning for this? We are hitting a few sites in Utah and planning to arrive on Wednesday, 23 March, and departing by 2 April. That gives us a few days with EJS and a few days after the chaos ends.
  2. rocknxj

    Looking for 2004 V8 WJ 4x4

    I'm looking for a 2004 Jeep Grand Cherokee 4x4 with 4.7l V8. Overland preferred, but I'll consider a Limited. I know this is specific, but they are out there.
  3. rocknxj

    1999 XJ Classic

    Time to sell my 1999 Jeep Cherokee Classic. Jeep has 168k miles and plenty of upgrades. Engine: Bulletproof 4.0L I6 motor with Brown Dog motor mounts, APN header, K&N drop-in air filter, and Magnaflow exhaust. Starter, alternator, radiator hoses, ignition switch relay, cap, rotor, plugs, and...
  4. rocknxj

    WTB swaybar discos

    Looking for JKS swaybar disconnects or similar for my LJ. PM me.
  5. rocknxj

    WTB swaybar discos

    Looking for JKS swaybar disconnects or similar for my LJ. PM me.
  6. rocknxj

    Pro Comp track bar JTB400 (NEW)

    Brand new Pro Comp JTB400 chromolloy adjustable track bar for your XJ (or Dana 30-equipped TJ/LJ) Bar is black powdercoated and still in the original box with all hardware required for installation. This fits a Jeep with 3-5” of lift and running the original track bar mount (body side). You...
  7. rocknxj

    Pro Comp adj track bar (JTB400)

    Brand new Pro Comp JTB400 chromolloy adjustable track bar for your XJ (or Dana 30-equipped TJ/LJ) Bar is black powdercoated and still in the original box with all hardware required for installation. This fits a Jeep with 3-5” of lift and running the original track bar mount (body side). You...
  8. rocknxj

    8.25 carrier

    I've got an 8.25 carrier from my '99 XJ that needs a home. I pulled it to run an ARB locker and don't need it. PM me if interested.
  9. rocknxj

    SmittyBilt XRC 8 winch and winch plate

    I'm selling my Smittybilt XRC 8 8,000 lb winch with steel cable. Winch has been used about 8 times and is in very good condition. Cable has no nicks or kinks. The winch is currently on a Tomken removable winch plate that I have used in my front bumper with 2" receiver. I also have a Warn Quick...
  10. rocknxj

    RE 6200 short arms and drop brackets

    Selling my RE upper and lower short arms and drop brackets. Removed when I upgraded to the RE long arm kit. Upper arms are adjustable. Both sets are greasable and have re-buildable bushings on one end. Rubber bushings on other end of lowers are in good shape with 3k miles on them. Will...
  11. rocknxj

    Pro Comp adj track bar (JTB400)

    Brand new Pro Comp JTB400 chromolloy adjustable track bar for your XJ (or Dana 30-equipped TJ/LJ) Bar is black powdercoated and still in the original box with all hardware required for installation. I purchased this track bar while at Moab after busting my trackbar. Unfortunately, it does not...
  12. rocknxj

    New Pro Comp adj track bar (JTB400)

    Brand new Pro Comp JTB400 chromolloy adjustable track bar for your XJ (or Dana 30-equipped TJ/LJ) Bar is black powdercoated and still in the original box with all hardware required for installation. I purchased this track bar while at Moab after busting my trackbar. Unfortunately, it does not...
  13. rocknxj

    JCR transfer case skid, short arms, drop brackets, etc

    I'll be in Rocklin on the weekend of 13 Feb. I have a sweet JCR TC skid that came off my '99 as well as upper and lower short arms and drop brackets from the RE 6200 5.5" lift. I also have one good leaf from the same lift and one leaf with a busted main spring. I also have a rear cargo mat...
  14. rocknxj

    fsm from jeepFSM.com?

    Anybody have a review of the electronic xj FSM from jeepFSM.com? Im skeptical of the low price and what you get. I fried my electrical system and need schematics for my 99. (Stupid ARB air switch!)
  15. rocknxj

    Eaton e-locker and Full Detroit combo meal

    I've researched the pros and cons of available lockers and believe an Eaton e-locker up front and full Detroit locker in rear will provide the best options for rock crawling and overall cost. For budget reasons, I'm keeping my sleeved D30 with the Warn hub kit, 4340 axle shafts, new Synergy ball...
  16. rocknxj

    Wanted D44 front axle

    Looking to buy a D44 front axle.
  17. rocknxj

    Wanted D44 front axle

    I plan to swap my busted D30 for a D44 and gear it to 4.88. Anyone in SC selling?
  18. rocknxj

    Rear fender flares, flare hardware, and other crap (Free)

    I have a bunch of crap that needs a new home. Most of this stuff is free unless marked. One set of red rear fender flares (free) Internal flare mounting brackets for the front and rear flares (free) One set of front inner fender liners in perfect shape (free) One front (stem mouunt) RE...
  19. rocknxj

    d30 4340 Nitro Gear axle shafts w/ spicer 760 ujoints

    I ordered the wrong chromo axle shafts for my d30. I have Warn hubs and these are for stock 27 spline axles with threaded ends. These are new in box 4340 driver side and passenger side inner and outter axle shafts with sweet Spicer 760 ujoints. I purchased these Nitro Gear and Axle parts from...
  20. rocknxj

    New Warn receiver shackle

    I'll be bringing a box of used parts, like stock sway bar end links, bumper brackets, inner fender liners, rear fender flares, internal flare brackets, speakers, radio, 33-tooth (yellow) and 34-tooth (green) speedo correction gears, and other crap. I'll also have a new Warn receiver shackle...
Top