Search results

  1. 962door

    anybody down there know of any rust free xj's for sale?

    My current one is literally coming apart and I am thinking about trying to pick one up from further south. Higher miles is not too big of a deal but a straight body and one that runs good enough to get back to Wisconsin is what I am after. I would prefer a 5 speed '97+ and to keep it under or...
  2. 962door

    won't start, sometimes...

    I have a 1998 cherokee with a 4.0 and an ax-15. Up until last week it has been good to me. We had a huge storm come through and when I went to go to work one day it started idling around 2, 000rpm. It did this for two days, I unplugged the tps and made sure it was dry and added some dielectric...
  3. 962door

    what arms forndrop brackets

    I am planning to put on a set of rough country drop brackets next weekend and am wondering what to do for control arms. Mine are the origionals as far as I know and I will not be using them. Right now I am leaning towards WJ lowers and am not sure what I should do for uppers. What have you used...
  4. 962door

    WTB 2-3" leaf springs

    Is anybody going higher and have some mild lift springs? I currently have an add a leaf and my spring packs are pretty beat up... Does anyone have anything laying around?
  5. 962door

    WTB:hp30

    I am thinking about to stepping up to 33's and want to find an axle to build. I would like one with 4.10 gears, or atleast a 3.73+ carrier, but am not holding my breath. I am a little north of Milwaukee. Let me know what you have.
  6. 962door

    rusty's 6.5" coils/control arms and RE hack n tap

    I was hoping to use these, but plans changed. I picked them up from 85xjwoody a few weeks back. I would like to get $150 for them. I just got a rubicon exress hack n tap from the classifieds. It appears new and has a new hardware kit with the drill bit and tap. I would like $65 for it. I am...
  7. 962door

    WTB 3" lift coils

    I'm looking to lift my front a few inches. I have a set of spacers, but am looking for a little more lift. I would even consider zj v8 coils. Let me know what you've got.
  8. 962door

    I'm gonna go look at a new to me xj

    It is from Wisconsin. It's a '98 4 door 4.0l 5 speed with a little over 200k on it. I am told the rockers are rusty. My current jeep has rust on the top of the windshield that lets water leak in and I would rather not go through all that work just to keep my 4 banger around... Is there anything...
  9. 962door

    shackle and add a leaf

    I have a used 2" full length add a leaf and a 1.5" shackle. I have heard the add a leaf gives a hard ride, would adding the longer shackle help smooth that out? My stock spring pack is flattened out and I am afraid that just the shackle will be too much for it... What are your experiences? Thanks
  10. 962door

    New guy from Milwaukee area

    I have been looking around on here for a few months and figured I'd introduce myself. My name is Matt and I am from just north of Milwaukee. I have a 1996 xj with the 2.5 and a 5 speed. I put a set of 30" bfg's on it and plan to put in the 2" budget boost I have soon. It is my first jeep and a...
  11. 962door

    powersteering

    I have a '96 with the 2.5l motor and a 5 speed. I just had a minor surgery and will be out of work for a few weeks so I'm going to adress some things now. After letting the jeep warm up and driving it a ways the powersteering pump whine's pretty loudly. Last summer I replaced the fluid in it...
  12. 962door

    2.5l to 4.0l swap

    I have a really clean 1996 cherokee that has a 2.5l and 5 speed. I know most guys say sell it and buy one with the 4.0 but rust free cherokees are pretty rare in Wisconsin. Plus mine has the 4:10 axles already. I have a 99 4.0 with a wiring harness from an xj with an auto tranny. I am rebuilding...
  13. 962door

    WTB: ax-15

    My dad is looking to replace the peugot in his yj. He lost reverse a few weeks ago and can't seem to find one within a few hundred miles of Milwaukee. Anyone have one laying around or know where to find one? He is really hoping to find one with the external slave. Thanks
  14. 962door

    anybody wheeling with a 2.5l four banger?

    I have one and am looking at going a little bigger with the tires. I was wondering who has one and what you've done to it/with it. Mines running strong and I'm thinking about a mild lift and 31's...
  15. 962door

    stuck caliper=wobble?

    Today I was about 20 miles from home and got a pretty decent wobble from 55-60ish. It was fine for like 30 miles, then I hit the brakes kinnda hard to make sure I was stopped at a light. When I got back up to speed it was wobbling pretty good. I could smell something getting hot/burnt and took a...
  16. 962door

    96 2.5 wont start

    I drove to work today just fine. When I got off I started it like normal and it turned over for 2 seconds and died. Now it wont start. I can hear the fuel pump working. On monday my heater control switch broke and spewed HOT coolant all over the coil and distributor. I replaced that and drove it...
  17. 962door

    2.5l to 4.0 swap

    I've got a 96 xj with a tired 2.5l motor. According to the FAQ it should have the ax-15. My dad has a much lower mileage '99 4.0 engine with the complete engine harness and computer. So what all would be needed to complete the swap. I searched but couldn't find anything. I would like to be able...
  18. 962door

    clutch issues

    I replaced my clutch this weekend and it went pretty smoothly. The only problem was when putting the clutch slave back on the line coming down from the master cylinder snapped. Can I just order a new line? Or does it come in a kit?
  19. 962door

    metal-on-metal noise when stepping on clutch

    I have a 96 cherokee with the 4 cyl. About a week ago the a/c was turned on for the first time in about 2 years, ever since then when you push on the clutch there is a god-awful noise. It isn't the belt. I read on here that the bolts holding the motor to the tranny might be loose, the top two...
Top