Search results

My son yanked out the turn signal lever on our 89 Comanche, when the wipers were turned on, key in "Run" position. We were working on the wiper controls on the lever, and it would only run in the "High" setting. I switched levers to see if it made a difference, but it did not. AT that point...

Pretty much ever since my daughter Amy was old enough to recognize, enjoy, and be along for road trips in cars, she always liked riding in the 87 MJ I built a few years ago, and sold around 2012-2013 (I think). It was a great, very capable driver and offroad truck that I had bought originally...

Hi Gents, I have a friend selling this Jeep. Its a 4.0L, auto, 2dr red exterior paint. Looks good from outside, very little rust on the body, but it does need work on the floors. Will not pass inspection without floor work. It does have many new parts though, and it runs well with no issues...

Hey gents, my nephew is looking for some used "budget" parts for his XJ build. -Sway bar disconnects 3" to 5" lift -Extended brake lines -1" poly spacers -Spare set of D30 shafts -Rear receiver hitch with nut plates for mounting -Adjustable track bar/bracket He is in So. NJ, so the closer the...

Xfer case has 78,000 miles on it, same as the Jeep. Its a 23 spline version. The 4:1 was put in around 40,000 miles, when I built the Jeep, and it has been in there ever since. It works great. Has never let me down. The chain is not rubbing or anything. Since its easy to do with it out, I...

There is no forum on the main forum board on NAXJA for NAC-Fest this year... How am I supposed to start drama if there is no forum for it???:roflmao:

1. Rich and Carol just simply rock. (I already knew that, but it still tops the list) 2. Spotting someone who can't hear REALLY fine-tunes your hand signals...:thumbup: 3. Some things never change... namely things like Stefan... please don't ever change. 4. Jordan put some time into creating an...

Yep, it starts already. Wiped out a lower ball joint and wheel bearings on my front axle, drivers side. Its most of the way fixed. Gotta source one more wheel bearing and put it back together. It wasn't a hard day yesterday, but it looks like the seal was leaking, allowing mud and gunk to get...

I have a brand new auto code scanner that has never even been plugged into a car yet. It is a top of the line Actron unit that will diagnose Check Engine lights and also clear them. It also does live monitoring as well, which is great if you have an intermittent problem, stumble or strange idle...

I have a friend looking for one for a project. Let me know if you have one. Thx, A

1. Rich and Carol are excellent cooks! 2. Despite Rich's best efforts, it is very hard to keep 25-30 people dry under a 12x12 Easy Up, and a 10x 20 tarp In a gully-washing downpour. 3. Bilstain 7100's WILL NOT hold up to repeated use as droop bumpstops and slight mis-alignment at that full...

Yep, its official... After I sold the WJ, I spent a while looking for the next perfect family wheeler, and the next serious build rig. I also decided that I wanted something with a full frame. I looked long and hard at the JKU's, but they are just too expensive for a 3rd vehicle. So I...

Does this position still exist? Is MrShaft still in it? Not sure anyone has noticed, but he isn't a member here anymore. Broken record "ON" Nobody is involved in the NAC down here anymore because no attention is being paid to this area for the NAC. It is seriously time to get someone...

November 9th. Cost is $20, and $10 for each passenger (over age 12). More information to follow.

http://www.pirate4x4.com/forum/usa-northeast/1130577-aoaa-its-official.html Its time for the NAC to throw in their help with this place. If someone from the BOD wants to set up a run/trail cutting, I think it would be a big hit. A.

Do we still have moneys set aside for her to help with the hurricane recovery? A.

Have you gents seen this? http://www.weather.com/news/hurricane-sandy-cars-20121231 Wow... Anyone in LI know where this is? A.

I got this with the WJ I recently picked up. It is a Yakima 29x63, and has the tire mount with it too. It is in great shape, and even comes with rear lights mounted up too. I am looking for $150 for it. Thanks, A. This shows what this rack was mounted on:

I have a Rustys t-case skid that is fairly new that I lined the bottom of with 1/2" UHMW plastic. The t-case skid is slightly tweaked and the plastic is scarred a bit, but it still works great, and with the 1/2" plastic, it slides off of things nicely and adds some rigidity to the skid as well...

What positions are up for election this year? Better get a post up and get people thinking about who they want to nominate...