Build thread: Out of Misery, again...

Fore Wheeler

Past MWC President
NAXJA Member
Out with the old, in with the new. One of the hardest things I've done was sell my Jeep. Here it is driving off into the sunset with her new owner...





My objective is to build a smaller jeep, with both great road manners and very capable off road manners.



This is the start platform of my new build. It is a Georgia Jeep that is super clean, it even has solid floor pans!!! I bought it for $500 with a bad motor, and it currently has a Yohn brand transfer case. (aka, 2wd).



I need drivetrain, so I went back to craigslist and found this 98 that was hit in the ass. I paid $800 for this jeep with 170k miles.





Currently I have sold the front clip for $250 and the rear axle is spoken for another $75, which leaves me at an investment of $475 for the parts jeep, which after a part out and scrap, I should be money ahead with a free drivetrain.
 
Last edited:

Fore Wheeler

Past MWC President
NAXJA Member
Re: Build thread: Out of Misery, again....

My first task was to start the parts buying. I decided to make this primarily an Iron Rock Off Road jeep. I am so impressed with the company, not only kick ass products, but their support of NAXJA and the MWC.

list of IRO parts:

5.5" Critical Path Long Arm Kit
Premium Rock Sliders
HD over the knuckle steering
D30 truss
8.25 truss
H-n-T SYE
Custom driveshaft
4.56 gears, front and rear



My second call was to our very own Brian Ho Bag, aka HD Offroad

front, mid and rear stiffeners
no lift shackle relocation brackets
wheel balance beads

I also went to the tire store.

33x12.50 Good Year MTR Kevlar
15x8 DC 2 Wheels



I also contacted RWK Haus for my front locker, after much debate and input from my NAXJA buds, I decided to go with the Yukon Zip Air Locker. The rear will have a factory limited slip for better road manners.
 
Last edited:

Jeepguy91

Active member
Board of Directors
NAXJA Member
Re: Build thread: Out of Misery, again....

Can't wait to see it when you get it done. A lot of good parts are going on it.
 

Luke95

New member
Re: Build thread: Out of Misery, again....

Id skip the IRO arms, but thats just me. Looking good man :D
 

terrehautian

NAXJA Member
NAXJA Member
Re: Build thread: Out of Misery, again....

Is your rear leaf springs being used again or did you get new ones? I would be interested in the old ones if they are still pretty arched.
 

Fore Wheeler

Past MWC President
NAXJA Member
Re: Build thread: Out of Misery, again....

There will be a part out thread when I'm ready to part it out
 

XJosh95

New member
Re: Build thread: Out of Misery, again....

I'm liking this already. I love that it's a clean vehicle to start with. Should make building it a bit easier.

Them riiimz is hawt!

I'm sure you'll get to it, but what are you thinking about in terms of armor?
 

Fore Wheeler

Past MWC President
NAXJA Member
Re: Build thread: Out of Misery, again....

For those who can't see my pics, go to my profile and look at my pic albums. I host my pics on naxja.
 

emptypockets86

New member
Re: Build thread: Out of Misery, again....

Can't see the pics in your post either, but checked them out in your profile. Sweet start! Looking forward to seeing this progress.
 

BIGSLVRXJ

New member
Re: Build thread: Out of Misery, again....

Looks like a good build Dan, I have a silver one almost identical to that, it won't be near as cool though :(

Can't wait to see where this goes.

-Collin

PS-if you want to sell any of the silver body parts or trade for dented ones plus cash (before you rail on it) let me know. I need basically all of them ;)
 

SAMSET

NAXJA Member
NAXJA Member
Re: Build thread: Out of Misery, again....

Im thinking about going with that IRO steering. looking forward to seeing this build
 

Fore Wheeler

Past MWC President
NAXJA Member
Re: Build thread: Out of Misery, again....

HD Offroad wins the race to be the first to get parts to me!!!! Thanks Brian

 

Fore Wheeler

Past MWC President
NAXJA Member
Re: Build thread: Out of Misery, again....

Looks like a good build Dan, I have a silver one almost identical to that, it won't be near as cool though :(

Can't wait to see where this goes.

-Collin

PS-if you want to sell any of the silver body parts or trade for dented ones plus cash (before you rail on it) let me know. I need basically all of them ;)
I will think about it Collin, my first thought is that I'd like to create my own damage, it wouldn't be fair if I had a beat up jeep that someone else beat up. :D
 

BIGSLVRXJ

New member
Re: Build thread: Out of Misery, again....

I will think about it Collin, my first thought is that I'd like to create my own damage, it wouldn't be fair if I had a beat up jeep that someone else beat up. :D
But think about how pristine those body panels could stay on my Jeep that will never see the likes of the Badlands :)

If you do decide that you'd consider it, I'd make it worth your time, I can't find silver 97+ body parts anywhere around here.

I'll quit derailing your thread now :kissyou:
 

kmanxj5050

New member
Re: Build thread: Out of Misery, again....

Excited to see the progress and watch you wheel it and dent it haha.
 

WB9YZU

NAXJA Forum Supporter
Re: Build thread: Out of Misery, again....

Looks like an interesting project!
 
Last edited by a moderator:

lesslimited

Official MWC Brewmeister
NAXJA Member
Re: Build thread: Out of Misery, again....

I've never had a problem seeing Dan's pics, but to get this thread somewhat back on topic, I would suggest not attempting rockface on it's maiden voyage ;)
 

Fore Wheeler

Past MWC President
NAXJA Member
Re: Re: Build thread: Out of Misery, again....

I've never had a problem seeing Dan's pics, but to get this thread somewhat back on topic, I would suggest not attempting rockface on it's maiden voyage ;)
Lol John! This jeep will be one of the jeeps setting at the bottom watching the "big" jeeps play.
 
Top