Always fun haha, wheeled what we fixed, seems to be holding up
Sent from my SM-G935V using Tapatalk
First post in sec with details of the rigs
- Thread starter 92_beater
- Start date
Sent from my SM-G935V using Tapatalk
Yea but those welds really should be redone with a 220 welder if you can find the time and welder.
What's the point when I've got a new body on the way
Sent from my SM-G935V using Tapatalk
Yes good point..... :dunno:
I'm actually having a problem with mine believe it or not, all my specs were perfect, passed pre drivi g test, second I put it on the road it's constantly locked, idk what's going on, will inspect it when I regear soon
Sent from my SM-G935V using Tapatalk
Had to fix an mj that liked it's side better than being on 4 wheels, used his winch, hooked to an anchor point, got him upright, then his started failed, so I had to give him a starter out of my spares in the jeep. Overall a good weekend to close out the life of the 92, it's time for it to become a 91
Sent from my SM-G935V using Tapatalk
Sent from my SM-G935V using Tapatalk
Where is that?Forgot to post a pic of it
Sent from my SM-G935V using Tapatalk
Easy path at the top of daniel, he liked the throttle a little to much, good thing I was there and knew how to fix him cause if not he woulda talked about it all night
Sent from my SM-G935V using Tapatalk
If you need something quickly, I would not recommend b Lee's, I called before I ordered said it's less than a one week backorder and only a couple days before it would shio, here I am a months and several days later with my hands in the air cause it still ain't here
Sent from my SM-G935V using Tapatalk
Sent from my SM-G935V using Tapatalk
Cancel it and call Andy @ Ironman4x4fab....... You will not get any BS from them.
I want to get rid of the inverted y though, and to top it all off they won't answer a phone or on Facebook right now
Sent from my SM-G935V using Tapatalk
Well that sucks. I still say call him and see what he says. All the B lee kit is is bent drag link and tie rod with heims from what I have seen. What about a WJ knuckle swap? I'm sure the pull a parts up there are filled with WJ's.
Time for a little update, the cherokee is gone, well it's still at the house, but it is forever decommissioned, kinda a sad day, but the new rig is more than making up for the emptiness that the old xj left, busting butt trying to get it ready for @ghost birthday party, build sheet to date in the next post
Sent from my SM-G935V using Tapatalk
Sent from my SM-G935V using Tapatalk
Rear axle- 29 spline 8.25 welded spiders Barnes 4wd anti wrap perches
homemade spring plates with extended bump stops
SOA swap
proportioning valve removed
removed brake line bracket to allow for the lift
Barnes 4wd shock mounts to get the shock mounts parallel with the axle
Bilstein 5100, 11 inch travel
Front axle- dana 30 hp from a 99 cherokee lockrite locker
ruffstuff specialties diff cover
Ares fab 1 ton utk steering
re track bar with double shear mount ballistic fab truss that I need to install serious offroad long arms
new bushings
Shocks yet to be decided on
Hockey pucks for bump stops
re 3.5 springs with spacers to find ride height, 6 inch springs will be on order
Brake lines from a chevy 1500 to allow the extra height
Tires, 36x12.50x15 tsl grooved, diy beadlocks
Body, homebrew rear bumper, cut down off of an xj to fit the mj like a roll pan with recovery points
on board air will be installed soon
transfer case skid
Cage to be installed soon
Boostwerks comp mount soon
Battery advance agm platinum 34 size
I'm sure there's more, gotta sit down and look at the build sheet
Sent from my SM-G935V using Tapatalk
homemade spring plates with extended bump stops
SOA swap
proportioning valve removed
removed brake line bracket to allow for the lift
Barnes 4wd shock mounts to get the shock mounts parallel with the axle
Bilstein 5100, 11 inch travel
Front axle- dana 30 hp from a 99 cherokee lockrite locker
ruffstuff specialties diff cover
Ares fab 1 ton utk steering
re track bar with double shear mount ballistic fab truss that I need to install serious offroad long arms
new bushings
Shocks yet to be decided on
Hockey pucks for bump stops
re 3.5 springs with spacers to find ride height, 6 inch springs will be on order
Brake lines from a chevy 1500 to allow the extra height
Tires, 36x12.50x15 tsl grooved, diy beadlocks
Body, homebrew rear bumper, cut down off of an xj to fit the mj like a roll pan with recovery points
on board air will be installed soon
transfer case skid
Cage to be installed soon
Boostwerks comp mount soon
Battery advance agm platinum 34 size
I'm sure there's more, gotta sit down and look at the build sheet
Sent from my SM-G935V using Tapatalk
