MISC XJ AND YJ PARTS

[MiNi Beast]

Basket 57"X28"x5.5"- $100
TJ and XJ air boxes stock and misc air tubes- $5ea
XJ 3" LIft- $125
YJ water pump, and clutch fan- $15
Misc stock rear XJ shafts-$5
XJ front Shafts (manual)- $25
ZJ V8 steering box 1" drop pitman arm for XJ-$60
YJ ac dash unit thing- $35
$others misc stuff, cpus, trim and switches, $5ea
all obo

Brushguard gone

it is a 1" drop for a XJ. It is a box from a V8 ZJ.

Also....
SHocks still in decent shape just the bushings are shot on them, Ran them with my 6.5" lift. Take $15 for them.
Steering I ran on my D 30 with 6.5 to 8.5" of lift, ran stock non tapped knuckles, ran for about a year, DD with 35's and 37's to AL and back so it worked.
may need some spacers for the heims is all. Take $75 I guess have more then that in heims and tube inserts.

 

[MiNi Beast]

I also have 2 96 XJ used unit bearings $ 50

 

[MiNi Beast]

Coils sold

 

[MiNi Beast]

Spicer Dana 30 yoke-26 spline-$10

 

[MiNi Beast]

ubolts pending

 

[MiNi Beast]

If you want a highway friendly box get one from a 93-98 ZJ. The stock XJ box steering ratio is 14.1:1 while the ZJ box is 12.7:1, quite a bit quicker but still not too quick for off-road. Standard Saginaw 3-bolt pattern.

 

[MiNi Beast]

For the steering

Tie rod is - 43 1/4" (tube end to tube end)
Draglink- 33 1/2" (tube end to tube end)


I ran a LH thread on the end of the stock on the left side of jeep and RH thread joints on the right hand side. This is what allow you to adjust your steering, then use lock nuts to secure them in place.

 

[MiNi Beast]

ubolts sold

have a RE h&T with the back half of the 231 case yet-$100
As well as a 249 TC from 95 ZJ-$100

 

[MiNi Beast]

Also have a FloPro 2.25 center in and 2.25 duel out, new in box $75

http://www.fle-online.com/cgi-bin/shopper.exe?keywords=FloProMufflers&search=action&template=CartTemplates/Mufflers/FloProMufflers.htm

hear what it sounds like here

http://www.flopro.com/mufflersounds.htm#

Asking $60- for the Cat.

 

[MiNi Beast]

XJ center console with vent tube-$30

Wrangler door hanger-$10

Chevy Fan- $20

 

[MiNi Beast]

hack and tap sold

 

[MiNi Beast]

bump to the top for best offers

 

[MiNi Beast]

bump to the top

 

[kmanxj5050]

pics of steering?? have been considering building my own heim setup. But if i could buy somethign done by a "MASTER FABRICATOR" i might do that.

but all kidding aside very interested. PM me

 

[MiNi Beast]

pics of steering?? have been considering building my own heim setup. But if i could buy somethign done by a "MASTER FABRICATOR" i might do that.

but all kidding aside very interested. PM me

Master fabicator? I don't even know how to weld. :roflmao::roflmao:

 

[MiNi Beast]

steering pending for next weekend, or buy it out from under the guy for $500!(10% will go to the buyer for the loss of the deal :laugh2

 

[MiNi Beast]

steering gone rear driveshaft gone

 

[MiNi Beast]

still got bunch of misc stuff on the selves yet