Winterfest Swap Meet

XJ&CHZ4ME

XJ&CHZ4ME

New member
This is for items that are to be bought, sold or traded at WF...like a swap meet, NOT swamp meat (dont get excited Flex).

I have a CO2 set up out of a kegerator. It has the the tap for the keg, some lines that are nasty, the regulator that is in rough shape but still usable and the spout that goes through the door. $50 or 2 cases of good beer, all dependant on your location and what we agree upon for "good beer"

Cheese "mmmm beeeer" Man
 
terrehautian

terrehautian

NAXJA Member
NAXJA Member
Who said they wanted the LED resisters at last years event and I forgot them. If you still want them, they are yours. If not, it will go to the person who wants them.
 
SAMSET

SAMSET

NAXJA Member
NAXJA Member
I have a bunch of random tan interior stuff(early years) if anyone is interested i can get some pics up.
don't want to dig it out if no one cares.


SAM'would be dirt cheap if anything'SET
 
Fore Wheeler

Fore Wheeler

Past MWC President
NAXJA Member
I have a steering column from a 94 manual trans XJ, black with key. $50

D30/8.25, 3.07 gears, complete hub/hub, drum/drum. $200/pair.




If these items are sold at this early date, I would ask for payment in advance. I have no issues storing and delivery to wf. I also will be in Fort Wayne January 5/6.
 
IllianaXJ

IllianaXJ

Support Your Local Trails
NAXJA Member
Steering column from '88 MJ. Column shift. Ignition key and ignition switch included. Maroon. Free or trade for ??
 
99SJ_Ex

99SJ_Ex

New member
Well there you go, see ya then ;)

Bushwhacker Fender Flares for a 97+ 4dr, Have weather stripping for the edge, but no hardware.

$100
 
IllianaXJ

IllianaXJ

Support Your Local Trails
NAXJA Member
IllianaXJ said:
Steering column from '88 MJ. Column shift. Ignition key and ignition switch included. Maroon. Free or trade for ??
Click to expand...
'92 NP231 transfer case. High miles, worked fine. $100.
Rear driveshaft from '92 4x4 auto XJ. Unknown condition of joints. $25.
 
99SJ_Ex

99SJ_Ex

New member
Good condition I'd say... They have marks on them, but not damage, scuffs, or anything like that. I got them used last spring, but never put them on... These are NOT the flat style, but the 'standard' ones. My fenders are trimmed and they would have worked so yes?
 
FlexdXJ

FlexdXJ

Gone but not forgotten...
I need a matching hatch, no rush so if one pops up near someone before WF I'll pay for it and buy some beer.
 
C

cdrake261

New member
99SJ_Ex said:
Good condition I'd say... They have marks on them, but not damage, scuffs, or anything like that. I got them used last spring, but never put them on... These are NOT the flat style, but the 'standard' ones. My fenders are trimmed and they would have worked so yes?
Click to expand...
What hardware are needed? I'm interested...
 
99SJ_Ex

99SJ_Ex

New member
The flavor of fastener you want to use, and some little spacers/washers for each fastener. You can d.l. the install instructions off their website which shows the hardware they use. I was going to use some proper size bolts, washers and wing-nuts (to remove them when needed) but plans of course changed...
 
99SJ_Ex

99SJ_Ex

New member
I will have to take some shots next weekend when I go back down to Eau Claire, thought I had some pics, but can't find them...

Hit me up back channel so we can keep this open for other swappers...
 
Last edited:
XJosh95

XJosh95

New member
100' of steel winch cable (unused) with hook (has seen better days), roller fairlead and poly isolator for hook. $50

Will send with Kimmer (if possible) if I can't make it.
 
You must log in or register to reply here.
Top